Home
More Filters
IX International Congress “Engineering, Environment and Materials in Process Industry” – EEM2025

Vol 9 2025

IX International Congress “Engineering, Environment and Materials in Process Industry” – EEM2025

Vol 8 2023

IX International Congress “Engineering, Environment and Materials in Process Industry” – EEM2025

Vol 7 2021

Vaccinium myrtillus fruits and leaves show significant economic importance due to their application in food, functional food, pharmaceutical, cosmetic, and healthcare products. Bilberry leaves contain valuable components, such as phenolic acids, flavonoids, procyanidins, anthocyanins, fatty acids, and dietary fibers. The mentioned compounds possess...

By Amjed Karkad, Muna Rajab Elferjane, Milena Milošević, Andrea Pirković, Diana Lupulović, Aleksandar Marinković, Aleksandra Jovanović

The radiative models used in the numerical simulations of the pulverized coal-fired furnaces can be divided into flux and zonal models. For the zonal models, furnace volume and walls are divided into volume and surface zones. For the calculations of the heat exchange, the direct and total exchange areas for each pair of the zones are needed. The pr...

By Nenad Crnomarković

Amaranth belogs to the group of pseudocereals. This pseudocereal is rich in proteins and does not contain gluten. Therefore, it is suitable for people on a gluten-free diet. In recent years, the number of people suffering from celiac disease or who are allergic to gluten has been increasing every day. The aim of this paper was to examine how the pa...

By Vesna Gojković Cvjetković, Dragana Škuletić, Željka Marjanović-Balaban, Danijela Rajić, Milan Vukic, Milenko Smiljanić, Dragan Vujadinović

The semi-rigorous model without holdups and the semi-rigorous model with minimum holdups give almost the same results. However, the former uses integration step 0.1 h and the latter integration step 0.00001 h. This, and the fact that a semi-rigorous model describes the dynamics of the batch distillation process more reliably than a shortcut model, ...

By Adnan Hadzihasanovic, Muhamed Bijedić

Conductive polymer composites offer innovative solutions for real-time food quality monitoring by enabling direct interaction with spoilage indicators. In this study, polyaniline (PANI) doped with trifluoromethanesulfonic acid (TFMS) was synthesized via oxidative polymerization and incorporated into biopolymer matrices—polylactide (PLA) and p...

By Ivan Ristić, Marija Krstić, Darko Manjenčić, Senka Popović

The consecutive microwave-assisted hydrothermal shelling combined with aerosol-assisted calcination was applied as a synthesis route for IrO2-shelled CoCeY oxide core composites, designed as potential high-efficiency catalysts for the oxygen evolution reaction (OER) with a reduced iridium content. The search for such efficient OER catalysts is of g...

By Katarina Đ. Božić, Marija D. Mihailović, Marijana R. Pantović Pavlović, Maja R. Stevanović, Miroslav M. Pavlović, Enisa S. Selimović, Vladimir V. Panić

This work investigates the process of forming metallic coatings of nickel on copper using electrolytic deposition. By focusing on the optimization of deposition parameters, such as current density, electrolyte temperature and deposition time, high-quality coatings can be achieved in terms of corrosion resistance, strength, adhesion and aesthetic ap...

By Stanko Spasojević, Milena Milovanović, Danijela Jovičić, Stana Stanišić, Zorica Ristić, Marija Mitrović, Bojana Lukić, Milorad Tomić

The characteristics of nickel coatings obtained by electrochemical deposition on steel samples of known chemical composition were investigated. The chemical composition of the steel was examined using the XRF method (X-ray fluorescence spectrometry) before and after the deposition of the coatings. The effect of current density and deposition time o...

By Stanko Spasojević, Snježana Vučićević, Stana Stanišić, Danijela Jovičić, Zorica Ristić, Marija Mitrović, Dubravka Banjac, Milorad Tomić

The inhibitory effect of Thyme (Thymus serpillum) extract (TSE) on the corrosion of two steel types in 4% HCl solutions was investigated (Steel 1 - DC01 and Steel 2 - X5 CrNi 18-10). Steel samples were chemically prepared followed by the examination of corrosion rate in both uninhibited and inhibited HCl solutions. Four solutions were used: Solutio...

By Marija Mitrovic, Milorad Tomić, Bojan Gorančić, Nebojša Vasiljević, Regina Fuchs-Godec, Dragan Tošković

In this paper, the influence of steel type, inhibitor concentration, and time on the inhibitory effect of dandelion root extract in a 4% HCl solution was investigated. Two types of steel of known composition were used, and the inhibitory effect was monitored in a time interval of 2, 4, 6, 24 and 48 hours. Dandelion root extract was obtained by the ...

By Nebojša Vasiljević, Marija Mitrovic, Regina Fuchs-Godec, Dragan Tošković, Milorad Tomić